Archive for Helmet

Oct
23

Autumn Colours

Posted by: chris | Comments (0)

I took the Goldwing out for a ride yesterday in perfect weather. I bimbled down to Ashdown forest – one of my favourite destinations at any time of the year. My route there and back takes me through lots of leafy country lanes and with the fine dry weather of the last few days, the roads were dry and the trees were a magnificent blaze of colour with a cloudless blue sky as background. It made for a perfect relaxed ride, especially on a weekday when traffic is relatively light and although the day was cold to start with, my Gerbings electric jacket kept me nice and warm.

One thing bugs me somewhat and that is a problem that has started to occur with my BMW System 5 helmet. All too frequently, the visor pops right off! It seems to happen when the flip up part is opened fully which in some way seems to force the visor free from its moorings. I’ll try taking it into South London Motorrad and see if they can do anything in the way of a fix. As it stands it’s making the helmet rather a pain to use as I have to keep stopping to fix the visor back in place.

Comments (0)
Apr
24

Bluetooth drives me barmy

Posted by: chris | Comments (0)

OK I don’t understand Bluetooth but then it’s supposed to just work isn’t it? On the Goldwing, I hear my GPS and other stuff (radio, CB etc) through a wired connection and the bike’s built-in intercom system but on the GS I have been using custom earplugs with built in speakers connected to the original Bluetooth dongle that came with my TomTom Rider 1. Those earplugs can get uncomfortable after an hour or two and and it”s a rather fragile wire that”s connected to them so I have been looking for an alternative.

My first thought was to put all my wishes in one basket and look for a Bluetooth flip up helmet with a retractable sun visor. Nolan make one but it doesn’t fit my head – like many flip ups it seems very short from front to back and presses hard on my admittedly big chin. OK so now I have to choose between a sunvisor and built in-bluetooth. The latter seems as a rare as rocking horse manure but there is a Viper RS101 helmet which I have not tried. I am perhaps perversely rather put off by its low price – £94.99 seems unlikely to buy very much head protection or quality and in a helmet I want both.

So, I decide to stick for the time being with my BMW system 5 and try to fit a Bluetooth headset to it. Accordingly I got a Scala Rider Q2 and managed to wangle it into the helmet with less difficulty than I had feared. The lump that sits outside the helmet is in the wrong place to use the microphone, being far too far back on the side of the helmet (forced there by the flip front) but as I want it primarily to listen to the GPS and its built in radio, this is not too much of a problem. Next job was to sync it with my GPS. I knew there might be a problem with the Rider 1 so I tried first with the Garmin 2820 on the Wing. It took me ages to learn how to put the headset in pairing mode. This was owing to a combination of not reading the instructions properly and impatience. When I had understood the unit must first be switched on before pressing the same switch again for an extended period to set it looking for marriage partners, I did eventually pair with the Garmin. But why oh why can’t we have a simple on/off switch instead of these stupid press it and pray type things that take forever to do something?

Next I tried and failed several times to pair with the TomTom. After several bouts of cursing I eventually succeeded by dint of understanding that the darn thing was trying and failing to pair with its original headset because that is what I was telling it to do in response to a rather ambiguous Yes/No query in its menu system. Finally in frustration, I realised I had to tell it to be more promiscuous and go and look for another partner when, thankfully it found the Scala Rider that had given up and gone home, or at least had stopped trying to pair on many previous attempts.

With the popularity of flip up helmets, sun visors and Bluetooth, I cannot understand why every helmet manufacturer is not in the game – ah well, that’s life at the bleeding edge I suppose..

Categories : Comms, GPS, Helmet, motorcycle
Comments (0)
Jan
13

Good weather for a while

Posted by: chris | Comments (0)

In between the wet stuff I had a nice ride yesterday in sunshine, if rather cold sunshine and because the sun is so low in the sky at the moment, potentially dangerous sunshine. Because it was very cold I put on a balaclava, then my Arai helmet with the headset installed because I wanted to listen to my iPod. Only trouble was, that this is a tight helmet at the best of times – so tight in fact that I couldn’t then get my sunglasses on. To hell with it I decided – I put my BMW System 5 on with enough room for balaclava and sunglasses but not equipped with a headset. Still, in the circumstances I figured warmth and vision were more important than music.

I was very glad of the heated grips and heated seat as I headed south at 08:30, also the big screen. Really, the Goldwing is a very civilised machine! I stopped by the BMW dealer at Pembury and bought myself a new visor which I need, my old one being rather scratched. I got one I didn’t know existed for the helmet – a double visor that cuts fogging, it’s also supposed to be scratch resistant. They didn’t have any tinted visors which the low sun prompted me to ask for and they advised me that I would have to order one from Southern Ireland as they weren’t allowed to sell them in this country. God how I hate this fucking government we have.

I enquired about the new BMW F800 GS – they are due in March apparently. I really lust after one of these but to be honest I am not sure where I”d ride it. There is no off-road opportunity for miles around. Perhaps I’ll get a trailer made for the Goldwing and haul it off to Spain!

One thing struck me about the bike yesterday and that was something I had noticed but forgotten to mention before. The gearbox is much smoother than it was when the bike was new. I had criticised the box for being agricultural previously and it is still not the best I have used ( I think that honour goes to the ZZR) but it is now changing very sweetly – I guess I must have knocked a few corners off here and there!

Comments (0)
Dec
05

Thoughts on riding gear

Posted by: chris | Comments (0)

Patagonia certainly tested my choices of riding gear thoroughly thanks to some very cold winds, rain, dust and wind as well as taking a pretty heavy tumble that road-tested my stuff. I am glad to say that it all worked pretty well in keeping me warm, dry and safe but with varying degrees of comfort and additional utility. Here are my main findings.

Keeping warm and dry

Several folk used electrically heated clothing – mainly Gerbings to keep warm and swore by it but I relied on passive protection and did not regret it – especially when seeing one of my companions keep draining his battery with the electrical wardrobe he wore. I found that a layered system comprising a merino wool undershirt with long sleeves, a cashmere cardigan and a Gore Windblock shell, all under my BMW Rallye 2 Pro riiding suit, kept me warm in even icy conditions with a 50 mph wind.

Importantly on a long trip, I found that I could wear the same stuff day after day without any odour making it unpleasant for me or the others. Partly this was because it was cold and mostly with a very low humidity so we didn’t sweat a lot but it is also I believe a property of the Merino wool. I alternated the undershirt with a Peter Storm thermal underlayer and this worked well although not quite as warm as the wool. It has the advantage of being a lot cheaper too.

We didn’t encounter a lot of rain but we had one very wet day on the Chilean side of the Andes when I wore my Jofama (or Halvarssons as it is sometimes called) rainsuit over the BMW gear. I was disappointed that this seemed to let in water through the zip but I need to try it again to be sure that I hadn’t made a mistake and left the flap of the zip open or some such. The material itself seemed to keep out water and was breathable as advertised.

Essential gear turned out to be a thin balaclava worn under the helmet. I had taken only a Buff but fortunately was lent a proper helmet liner by Shira – one of my riding companions and this made all the difference between having a comfortable head and a very cold one.

The Sealskinz socks worked wonderfully well. Even when my boots were half full with water, the socks kept my feet warm and dry. The link only shows mid length socks but mine were long ones.

The Rallye 2 Pro suit kept me dry when I wasn’t in the rainsuit thanks to effective goretex liners in the jacket and pants – however some drawbacks to this outfit merit some extra words – see further down the page.

Keeping safe

My helmet, gloves boots and suit all kept me safe including one quite heavy get-off in roadside rubble at speed.

Boots
These were Alpinestars Tech 7s and they proved to be very comfortable, not bad even for walking about in and most of all I believe they saved me from a broken leg or ankle when I came off. Riding the ruts on Ruta 40 threw up a lot of stones and riders without the kind of protection I had suffered when stones hit their toes. My boots completely protected me from this hazard and inspired a lot of confidence when standing on the pegs and riding hard in the dirt.

They were easy to put on and take off – unlike previous motocross boots I have owned and the clip fasteners proved very secure. They were not waterproof but my Sealskinz made sure I didn”t get wet feet. When I dried the boots out, I used two or three changes of crumpled newspaper over the space of a few hours to absorb water and this worked well leaving the boots dry and pleasant to wear the next day.

Helmet
My Arai Tour Cross helmet was mostly a winner. My head is still in one piece and it kept me warm and dry. The visor needs replacing now as the dust on Ruta 40 has scratched the one I was using quite badly. The peak was useful at times as the sun could be low in the sky and quite blinding at times. However, I did miss my BMW System V flip-up, especially when we stopped for a bite to eat at the roadside, or to take a photograph. Despite strong winds, I did not find the noise or head buffeting as bad as I feared it might be.

Gloves
I used first a pair of no-name gloves with kevlar palms and made from quite thick leather that I wear in the UK when it’s not raining and these did fine until it got colder as we rode further south. They were the ones I was wearing when I fell off and my hands are fine. Later, I donned a pair of Frank Thomas goretex winter gloves and these worked very well even in heavy rain and freezing winds. I was surprised because Frank Thomas doesn’t have a great reputation for waterproof wear but I was very pleased with my gloves – which also provided good feel for the controls.

BMW Rallye 2 Pro suit
I thought long and hard about getting this suit and in retrospect it was probably a good choice but not without a couple of downsides. It saved my hide in the fall I had and for that I thank its body armour, especially the hefty back protector and knee guards. The fleecy goretex liners in jacket and pants kept me dry and I didn”t get damp from perspiration. It was also quite comfortable, including around the neck which is often a source of weakness in motorcycle jackets. So what was wrong with it?

First the zips – they did the job but only just. They are undersized for the loads on them and they are not waterproof. The pulls are tiny and can’t be operated in gloved hands. It’s all too easy to find yourself trying to zip the goretex liner to the outer shell’s zip because they are not very different in size. I broke the pull on the outer shell’s main zip – fortunately on the last day of riding so I didn’t have too long worrying about a lash-up solution. If you don’t get the male portion of the zip fully home in the bottom receptacle, the zip pulls apart very easily. I find this a real and annoying weakness. I hope to get the zips replaced on the outer shell, with something better suited to the job.

Second, the pockets. There are just too few and they are small and not waterproof. I need a good sized waterproof pocket to hold maps and other documents whereas the suit has but one small waterproof pocket on the outer shell- just large enough for a passport. The inner goretex liner has a further water proof pocket but getting at this in a hurry is difficult and a real bore. The lower pockets on the outer shell are not very useful at all. Anything in them gets wet in a light shower and they are very small. Aerostich does pockets very well except that they are not waterproof either, although they offer more resistance than the BMW pockets. I did find the pocket on the left sleeve useful for holding my little Canon Powershot SD1000 camera and I have to admit it seemed to keep the camera dry in light showers.

I did like the pants of the suit, even though they only had two moderately sized pockets. They were comfortable, warm and dry although I did find it necessary to wear thermal long johns in the south but with those they were fine. They fitted pretty well albeit tightly, over my motocross boots and the height of these pushed the knee protector on the left leg, higher than ideal. However, that was a minor problem and my knee remained well covered by armour. With the kind of riding we did it was no hardship to wear these all day and I will definitely consider wearing them in the UK on my Wing. They have nice l

eather on the insides of the thighs which will avoid the paint scratching problem my Aerostich Roadcrafter presents.

Camelbak
It may seem odd to include this under the heading of keeping safe but it ensured I didn”t get dehydrated and there was a real danger of that in the cold dry desert. Dehydration is insidious and it can creep up on you until the first time you realise there is a problem is when your attention has wandered and you are upside down in a ditch. I have the 3 litre bag in an Osprey 33 litre backpack and the combination worked very well. I drank the full 3 litres most days whilst riding – I could just get the bite valve up inside my helmet – one advantage to the design of the jaw protector. I did not find the weight on my back a problem at all which really surprised me. Apart from the Camelbak, I had only light clothing and a few snacks in the backpack. This was no problem as its design allowed for it to be strapped down into a small compact package when not full.

Gadgets

I took my Garmin GPS Map60C and that was useful for geotagging photos when I remembered to set the date and time properly on the camera.. Fortunately I did photograph the display a few times so was able to use this as a way of deciding where pictures were taken. I didn’t use it for navigation and felt no real need for GPS nav on the bike. A few follk did have Garmin Zumos and the like and these seemed to work well for them.

I took both a full size iPod and an iPod Nano but didn’t use either much except on the plane journeys. I did have all my important documentation loaded on them just in case I lost the paper stuff but fortunately, didn”t need any of this backup.

My choice of camera – a Canon Powershot A620 worked well until some point at which it stopped focussing correctly. I think it had been switched on in the tankbag and something prevented the lens from extending which gave it problems. These seem to have sorted themselevs out now but not wishing to be without a camera, I bought a new point and shoot in Chile. It is a Powershot SD1000 (I think that is the IXUS 70 in Europe). It takes photos identically to the A620 but is a much smaller package and the menu must be used for settings available on the larger camera by turning a dial. Since I took most pictures on full auto this was not really a problem. It was a good decision to take the smaller camera rather than my Nikon SLR – having the thing easily to hand encouraged me to stop and take pictures whereas the palaver of getting the big camera out of the tankbag or elsewhere does the reverse. The quality of pictures is quite high and thanks to the plethora of good photostitching software, the limited lens capabilities is not really a big issue.

I have Tissot Touch wristwatch and I used the compass and altimeter a lot during the trip – hardly an essential item but nice to have. If only the darn thing would show the day of the week!

My Swiss Army knife proved invaluable as always. I sometimes think about getting a Leatherman for the hefty pliers but so far it hasn’t been needed.

Comments (0)
Aug
30

Treffen

Posted by: chris | Comments (0)

No longer a Treffen virgin, I spent 4 days in glorious sunshine at Carmarthen where the 2007 British Treffen was held. Considering the dire weather we have had for most of the summer, the sunshine would have been enough to make me enjoy it but as a bonus, the event itself was great fun. Seeing all the different bikes in a multitude of configurations (trikes, add-ons, paint jobs and so forth) was quite a feast for someone newly enamoured of the Goldwing and needless to say, it has inspired me to think of the sorts of things I might yet do for my bike. I did get a couple of things whilst there, notably a CB radio, yet to be installed, and a J&M headset which is now in my Arai Quantum – I couldn’t see how to fit it to my currently preferred helmet – a BMW system 5, although I may be encouraged into radical surgery of the helmet if I like it enough. A quick test this morning suggests it will work very well.

I used my new tent which provided ample accommodationMy tentand although it looks a little lonely here, it was soon surrounded by others as more people including my new buddies in Kent Wings, arrived. There were close on 800 inscriptions for the event and although I have no idea hw many of these were foreign, there were certainly enough to make one realise the international nature of a Treffen. Some of the vistors provided considerable entertainment in the form of spectacular bikes – not always the prettiest for sure!

On getting back home on Monday afternoon, I found myself in considerable trouble. A hip that had been slightly sore for a couple of days had become so painful, I could hardly get off my bike and walking was a nightmare. I slept not a wink that night and on Tuesday morning took myself off the doctor’s who promptly sent me to A&E on the basis that I might have septic arthritis – a potentially fatal condition. After not too long waiting around, I was seen by a doctor who diagnosed severe bursitis of the hip, possibly brought on by my unsatisfactory sleeping arrangements at the Treffen – basically an inferior lilo that left my hip in hard contact with the ground, I think a camp bed is next on my list of must haves! Anyway, now a couple of days later and having popped a few pills, I am feeling somewhat more human and thankful to both the gods for sparing me septic arthritis and the NHS for sorting me out.

Comments (0)
Jun
26

More Autocom research results

Posted by: chris | Comments (0)

I spoke directly to Autocom this morning who confirmed that their Pro AVI unit can indeed be installed in the manner I wish viz:- integrating all bike audio functions and providing a bike to bike facility although this requires a separate transceiver (walkie-talkie pair). They also do installation work at their place in Warwick including putting the headsets into helmets which might be valuable if the installation in the BMW System 5 is difficult.

Finding it still difficult to believe that the installation in the BMW helmet would be all that difficult, I took myself off this morning to Caterham where a BMW dealer (South London Motorcycles) lives, only to find that their helmet expert is taking his summer holiday.. However, one of the service guys showed me how to remove the visor and the flip up jawpiece, and the cheek pads so I am more confident than before. Plus a bonus, I discovered an Autocom document that deals with the installation in a system 5 helmet. I think people who have been telling me that the BMW helemt is difficult is because they have assumed it was the same as the Scuberth helmets (and Schuberth make the BMW helmet), however, the fit is very different. I wanted to get a Schuberth helmet but none suited me, whereas the BMW one is very comfortable.

Comments (0)

Thanks to Dave’s advice on the problem with high impedance speakers in my old Autocom headset I was reminded of the custom fit earbuds (that I had made for me at a motorcycle show) which have speakers built in. I previously used these with the TomTom on my Pan via a bluetooth thingy that reposed in a pocket of my riding suit. Sooo.. off to Maplins for an adapter to connect my little earbuds plug to the Din plug on the bike. Easy-peasy thought I, except that the plug on the earbuds is 2.5mm and when buying the adapter I had thought it was 3.5mm – so back I go for another adapter – actually the third because initially I was forced to buy a 5 pin Din to quarter inch, a quarter inch to 3.5mm and now with a 3.5mm to 2.5mm I have something half as long as a fishing rod and just as bendy, to connect the 5 pin Din to my earbuds.

The acid test – switch on the radio, switch from bike speaker to headset – nothing! Ah well, perhaps these are high impedance too? But then I thought that the miniscule bluetooth adapter had so little power, surely these earbuds must be low impedance? So it proved when I fiddled about with my national exhibition of adapters and was suddenly deafened by the Kaiser Chiefs (I must get around to programming Radio Three :) ).

Trouble is that apart from the bendy connection, the wire to the earbuds is as thin as dental floss and probably not a lot stronger, so I really still need to find a more robust solution. Well, the OEM Honda headset is one possibility at £200! So too is a variety of cheaper headsets that all promise zero noise, quadrophonic sound and “I’ll still love you in the morning”. However, the helmet man at Dobles, tells me that my favoured helmet (a BMW flip-up is – despite having big cut outs for the ears – the worst imaginable for installing a headset as there is nowhere for the wires to go. He demonstrated by taking a new Arai off the shelf and showing me how in about five minutes one could install a set in that versus the 3 hours estimated for my BMW helmet. I really don’t want to buy another helmet. I still own more than most mortals and not just the ones I have crashed in either, however, it’s starting to look inevitable.

I am now looking at the Autocom Pro AVI stuff in the belief that I should be able to integrate it into my Goldwing audio and potentially use it for Bike to Bike communication when I get around to attending Treffens etc.

The man at Dobles is looking into this for me – I hope to hear next week what he finds out. Stay tuned!

Categories : Comms, Helmet
Comments (0)
May
15

GPS and Helmets

Posted by: chris | Comments (0)

I really value GPS in my cars and on my bikes. On the ST1100 I am trading in for the Wing, I have a Tomtom Rider (Version1) and I listen to the voice prompts via custom ear plugs with built in speakers. These are pretty comfortable and fit far better inside a helmet than any speaker system I have tried, although my BMW flip-up actually has a ton of room for speakers compared with any other helmet I have tried, including the Schuberth – which was supposed to be pretty much the same as the BMW helmet, which Schuberth make.

What is bugging me are the very unflattering reports on the built-in SatNav on the 2007 Wing and it looks as if a Garmin Zumo 550 might be a good thing to get. I shall hold off until I have tried the built-in unit but I am not hopeful after getting used to the facilities offered by the Tomtom. I should be able to use my existing headset for the Tomtom with a Zumo, though I am not certain.

Categories : GPS, Goldwing, Helmet, motorcycle
Comments (0)