Archive for F800GS

Dec
25

Welcome to my latest attempt at a blog

Posted by: | Comments (0)

Well if you made it over here from my old blog, you’ll understand that I am totally pissed-off with WordPress. Trying to upgrade to version 2.7 completely hosed my blog and all the archived entries have become inaccessible. I don’t know if I’ll have better luck here but it’s worth a try I guess.

If you have stumbled across this for the first time, then I’ll just say that this blog is about my experiences on two-wheels – a BMW F800GS and a Honda Goldwing 1800. These are very different bikes and designed to do different things but I enjoy both more or less equally.

Comments (0)

My crashbars and bash plate arrived from Adventure Spec this morning. They were delayed apparently because the guys at AS had been unable to get up a snow-covered hill to their workshop on top of some god-forsaken moor and as a result were not posted until Monday. They arrived as shown in a rather unprepossessing bag but also as shown, were actually very well protected from the slings and arrows of Royal Mail by various bits of pipe insulating foam and carefully positioned brown paper.


First impressions are of a very solidly made bit of kit with nice neat welding and excellent powder coating. I just had time to fit the bashplate before it got too dark and cold.

The bashplate makes the BMW supplied bashplate look really poor. Mine had split a weld somewhere on the trails of deepest darkest Wales in September and when you compare the welds it is easy to see why. The black AS plate on the right is welded inside and out whilst the BMW plate is welded only on the outside. Where the split occurred I can see only very limited penetration of the weld metal. Also, the AS plate is made from 4mm ally whilst the BMW plate is only 3mm thick. Also, the BMW plate has a welded seam running up the middle, whilst the AS plate is a single piece of metal at that point.

I hope to fit the bars tomorrow and if they go on as easily as the bashplate, it should be a doddle. All the nuts are in stainless steel and the five spaceers that come with the kit are in balck anodised ally.

Categories : BMW, Equipment, F800GS, motorcycle
Comments (0)
Nov
12

New Tyres and a Plan

Posted by: | Comments (0)

When lubing my chain after my trip to Wales on the GS, I noticed that my rear tyre – a TKC80 was split between a couple of tread blocks. It wasn`t catastrophic looking and it had brought me back from Wales in one piece, but not wishing to tempt fate, I had the tyre replaced this morning at South London Motorrad. I must remember to measure the tread block before using the tyre. My last one seemed to wear down quickly, particularly in the centre section but as I hadn`t measured the blocks when new, I had no way of actually measuring the wear.

Now to the plan – I am aiming to go to northern India and the Himalayas next year! SWMBO has kind of given me her blessing…

The trip will be aboard Royal Enfields – the best bike to have in India if you need repairs apparently. Best of all, buddies from my Patagonian adventure are also planning to come – should be a great trip.

OLYMPUS DIGITAL CAMERA

Comments (0)
Sep
24

Welsh Weekend with the Adventure Riders

Posted by: | Comments (0)

What a great weekend it was too! It was a really sunny and lovely weekend weatherwise but I got wet, cold and muddy despite that. Probably that was because I rode my bike up and down Welsh mountains and along lanes that had been chosen by folk like me – in search of some wonderful off-road riding.

I signed up on the Adventure Rider forum for a so-called Equinox Rally Novice weekend and the results are to be seen here I have nothing but praise for the organisers who had gone to endless trouble to sort out routes that were suitable for a largely unknown and mixed bunch of riders coming from all over. The weather for the previous several weeks had been anything but encouraging and I was very doubtful that the event would actually take place. As I was in Italy with LOML until a couple of days before, I had only one day to read the forecasts and weather history and then to decide it was probably worth the effort and then to pack all the camping gear for the weekend. As this was to be on the 800 sans trailer, it was a new experience for me. Needless to say, I packed too much as usual. I used half the clothes I took and still felt somehow overdressed but wanting something different.

The riding was exceptionally good. A great mix of mud, rocks and broken bones – thankfully not mine but requiring two helicopter medevacs in any case. These were performed by the Welsh Air Ambulance service and what a terrific job they did. So much so that we are all now contributing to this charity organisation.

I am pleased with this picture that Timpo took of me. He really caught the water as it sloshed into my helmet!

See the rally pix for more of this sort..

One thing caught me by surprise – we were doing a route called Strata Florida and went past a load of wreaths that had been laid for the young girl who had died in a recent flood when the 4×4 she was in had been swept away by the river at a crossing. We crossed at the same point on bikes and there was no danger of being swept away (I think) but it is crystal clear that conditions can and do change very quickly.

We crossed the river many times and went through so many very deep puddles that I feel quite at home in the water now although I`d hesitate to tackle it by myself having found out just how easy it is to fall down and get a leg trapped under the bike. The trouble is the rocks under the water are unseen, slippery and odd sizes – there`s just no way of picking a way through them unless you can see them from well above – as we did on a couple of occasions when there was a bridge alongside a ford.

I was delighted to find such a nice group of folk who like off-roading. They were very kindly disposed to all the newbies and helped me countless times in picking the bike up and in encouraging me up various routes that I would nt have had the courage to tackle on my own.

I was pleased with the performance of the F800GS, it performed very well and only sustained one broken mirror as a souvenir of three days of abuse. It seems to love dancing over rocks (or at any rate, I do) whilst the mud slogs are not such fun. To be honest, I have never felt so tired as when paddling the darn thing trough some of the two feet deep ruts that we had to contend with. Still it went through several where the bigger 1200`s got stuck on their cylinder heads and had to be picked up and pushed through such sections.

One tip I learnt from Robbie C was to use second gear and spin the rear wheel fast, so that it flung off the mud clogging the treads. This helped a lot in gaining traction in the really boggy bits.

Comments (0)
Aug
03

Fantastic Wiltshire Ride

Posted by: | Comments (0)

A member of the UKGers forum had laid on an invitation ride for big trailies and novices over some of Salisbury plain and anxious to try out some new territory and also to see how my Metal Mules performed on the rough stuff, I was keen to sign up. I became rather less keen as I traveled down yesterday to the meeting place in pouring rain and at one point, practically no visibility. I stopped at a Little Chef about 20 miles from my destination for a warming cup of coffee and dithered about whether I should turn back or not. I am so very glad I didn’t because I had a wonderful day. The rain eased considerably and for the rest of the morning it was intermittent showers and grey clouds but in the afternoon, the sun came out and we had a lovely wamr bright day – as one should at this tie of year I feel!

Our guides were all local to the area and knew the plains like the backs of their hands, including the ranges and when it`s safe to cross them!

The rain ensured we had some nice puddles to play in..

We also forded one river that was quite deep and I wondered if the panniers would lifet the rear of the bike high enough to reduce traction! Evidently not enough to prevent me getting through and the panniers stayed totally dry inside. However, the topbox was a different story. I had put a full bottle of water in it and all the bouncing around destroyed it and all the stuff I had really wanted to keep dry and had therefore carefully put in the topbox, was suddenly not so dry! A valuable learning experience. Another was the fact that a road atlas made with a spiral binding can become a loose collection of pages as the spiral unscrews when subjected to a lot of bouncing around!

Comments (0)
Jun
09

Metal Mules and a Movie Cam

Posted by: | Comments (0)

I ordered some of these for the GS quite a while ago – in late April if memory serves – at which time they were awaiting delivery of the new Scorpion exhausts which are needed if one wants a balanced pannier set up with no exhaust cut-out, as I do. As I was going off to Italy, I reckoned I could happily wait for the exhaust and on my return I had fixed up to go down to Hassocks last week but then Paul at MM phoned to tell me he is still waiting for the exhaust. OK, I rearranged the date for tomorrow but then this afternoon another conversation with Paul took place – déjà vu all over again as they say..still no delivery date on the Scorpion.

I shall go for a ride in any case. I got myself a little Action Cam today and have fitted it to the bike, so I hope to have fun tomorrow recording some nice lanesAction Cam

It came with a mount designed to fit something like a bike’s handlebars plus a couple of straps to fix it around a helmet or one’s arm. I couldn’t use the handlebar mount as it was so made up a fixture to sit in my RAM mount (good job I had a bit of ally rod and plate as well as a lathe handy!)

Another neat thing I have come across is a plugin for my Tomtom Rider – I did not even know it could use plugins! This one is called Event Logger and amongst other things, it can record a track log on the Rider. The program is free and on a short test seems to work as advertised. I shall try a longer test on my ride tomorrow.

Comments (0)
Jun
07

This is a Green Lane!

Posted by: | Comments (0)

It just happens to be blocked by a rather large tree root..

Turning six bikes round in a lane narrower than the bike is long necessitates some rather hard work..

It was a brilliant day, organised by Mike Wilson at South London BMW. Six brave souls, including Mike – bravest of all for looking after us! – took to the Surrey hills and encountered most kinds of terrain from loose rocks to deep pools. Here is Mike showing the rest of us wimps how to do it..

I only fell off once which is a great improvement on my last outing! I had taken some precautions such as removing my mirrors – this made me realise just how much I use them as I felt completely blind for a while – and taking some spanners and the Torx keys on sockets. As luck would have it, the only thing that was right was the spanner for the mirrors. I could have done with a couple of other things after my “little off” but naturally, they were at home in the garage..

Comments (0)
Jun
02

Ride Out

Posted by: | Comments (0)

I had a great ride yesterday with guys on the UKGSer forum. We started and finished at Newlands, taking in three counties in a 120 mile loop through some very pretty country side and along a fine mix of roads including some gravelly muddy stuff that almost threatened to become off-road, shady country lanes and some faster stuff with nice sweepers. I was pleased with the road going performance of the TKC80s although rather cautious when it came to exploring their full potential in the bends – which often had gravel just waiting around the bend – I wasn’t desirous of finding their maximum lean angle the hard way but I suspect it is quite a bit more than I was prepared to try.

Comments (0)
Apr
14

YEE HA!

Posted by: | Comments (0)

I had a fantastic day on Saturday, taking the GS properly off-road for the first time. The weather was rather mixed, starting out nice but with some rain and hail later. It didn’t stop five of us having a ball in the mud though. The new tyres were perfect for the job even if the rider wasn’t! I fell off enough to test various aspects of my set-up – most things survived OK apart from the Satnav bracket which broke, the mirrors kept being knocked loose but stayed in one piece and the gear lever which was bent double on one occasion and merely 90 degrees on another survived the bending back to its original position.

First we got the bikes muddy, then we cleaned them:-

Comments (0)
Apr
10

Weird Weather!

Posted by: | Comments (0)

This was the scene chez moi last Sunday before the snow really came down and the bike went back into the garage! Since then we have had a couple of lovely days and I rode both bikes (on separate days! :) )

Tomorrow I am taking the bike to South London Motorcycles to get a set of knobblies fitted as on Saturday I shall be doing a bit of greenlaning – provided that the snow doesn’t come back in earnest..

I have ordered a set of tyre irons and a bead buddy – still neeed a bead breaker probably and a couple of other things, so I can change the tyres back and forth as I need. This is the best site I have found with advice on changing tyres on wheels like mine

Comments (0)